loading

Zero-Carbon HHO Solutions. 20 Years Of Proven Expertise.

Industry challenges
In transformer manufacturing, copper bar overlap, winding lead connection, and high/low voltage terminal welding are critical to conductivity, temperature rise control, and short-circuit resistance. Yet traditional methods face six persistent challenges.
Oxy-acetylene, propane, and LPG cylinders in workshops pose deflagration risks during storage, handling, and connection.
Carbon-based fuel combustion deposits carbides and slag on copper surfaces, directly degrading weld conductivity.
Combustion carbides pollute the workshop, endanger operator health, and fail green factory standards.
Unstable, diffuse flames with wide heat-affected zones can scorch nearby precision components and insulation, reducing yield.
Prone to slag inclusion, oxidation, and cold joints-increasing contact resistance and localized heating. Loose winding joints can escalate to arcing or fire hazards.
Manual varnish removal before welding adds steps and labor. Soldering iron heat can transfer through leads, damaging internal coil insulation and causing turn-to-turn short circuits.
Okay Energy Solution
Okay Energy oxyhydrogen generator generates HHO mixed gas (hydrogen and oxygen in a 2:1 ratio) on demand from water and an alkaline catalyst (potassium hydroxide) using DC power, which then passes through wet-type and electronic flashback arrestors before igniting through a specialized torch to produce a concentrated 3000°C flame. 
This solution delivers on-demand generation, a concentrated flame, zero-carbon environmental protection, and solder joints free from cold solder defects, and has been successfully deployed in numerous transformer manufacturing facilities worldwide.
Comparison with Traditional Processes
Okay Energy's HHO welding solution for the motor industry leverages 20 years of alkaline water-electrolysis expertise. 
Dimension Traditional Oxyacetylene Welding Okay Energy Oxyhydrogen Welding
Fuel Source Acetylene cylinder + Oxygen cylinder Water + Electricity, on-demand production
Flame Temperature Approx. 3100°C (diffuse) 3000°C (highly concentrated)
Safety High-pressure cylinders, explosion/leakage risks No gas storage, multiple flashback arrestors, working pressure <0.1MPa
Environmental Black smoke, toxic gases Combustion byproduct is water vapor, zero pollution
Heat-Affected Zone Large, prone to deformation Small, aesthetically pleasing joints without cold soldering
Recommended Equipment
Okay Energy offers a range of oxyhydrogen welding machine models for different transformer welding scenarios.
Standardized three-step welding.
Zero-carbon combustion, cold-solder-free, and proven in transformer facilities worldwide.
1
1, Equipment Start and Gas Generation
Power on, begin electrolysis, purge the line once pressurized, and adjust flame length.
2
2, Direct Welding (No Stripping Required)

Position enameled wire, leads, or copper busbars in the flame. The HHO flame instantly burns off insulation and melts copper into a full joint-no flux required.

3
3, Completion and Inspection
Close the torch valve and check joint strength and appearance. Total welding time is significantly reduced versus traditional methods.
Key Advantages
For more product information or customized welding solutions, please contact Hunan Okay Energy Technology Co., Ltd.
Established in 2006, Okay Energy has obtained over 20 national patents in the oxyhydrogen energy field. The company is a national high-tech enterprise integrating R&D, production, and sales.
The oxyhydrogen flame reaches 3000°C with concentrated, non-diffuse characteristics. The small heat-affected zone produces weld joints without cold soldering or oxidation, resulting in aesthetically pleasing, strong joints with excellent conductivity.
The equipment features patented wet water-sealed and dry series flashback arrestor technology, equipped with overpressure protection, over-temperature protection, water shortage protection, leakage protection, flashback prevention, and other multiple safety mechanisms, eliminating safety hazards at the source.
Raw materials are only water and electricity, saving 35%-60% compared to traditional fuel gases. No cylinder procurement, transportation, storage, or special equipment supervision required-one investment yields long-term benefits.
Client Success
Which then passes through wet-type and electronic flashback arrestors before igniting through a specialized torch to produce a concentrated 3000°C flame. 
Client Success
Which then passes through wet-type and electronic flashback arrestors before igniting through a specialized torch to produce a concentrated 3000°C flame. 
Looking for hydrogen-oxygen energy equipment? Contact us.
If you have any questions about our products or services, feel free to reach out to customer service team.
Please leave us a message with any questions.
Offering CE/FCC/ISO-certified solutions with proven global case studies and an open invitation for worldwide distributors.
Contact Us
Contact Person: Sherry
Tel: +86-18932451962
WhatsApp: +86-18932451962
Company Address: No. 204, Building 2, Xinggong International Ind. Park, No. 100, Luyun Road, National High-Tech Development Zone, Yuelu District, Changsha, Hunan
Copyright © 2026 Okay Energy | Privacy Policy  |  | sitemap

Contact us
whatsapp
email
Contact customer service
Contact us
whatsapp
email
cancel
Customer service