Product Introduction
For copper tube brazing in air conditioner and refrigerator refrigeration systems, the oxy-hydrogen generator delivers a concentrated 3000°C flame with minimal heat-affected zones, effectively preventing deformation and oxidation of thin-walled copper tubes. The smooth, fully-filled joints pass pressure tests directly, fundamentally reducing refrigerant leakage risks.
Generate mixed gas on demand by electrolyzing water, with multi-level flashback and overpressure protection, no need gas cylinder, eliminating high-pressure storage and explosion hazards. Combustion yields only water vapor with no harmful emissions. Very suitable for high-reliability welding demands of the refrigeration industry.
Product Features
Product Specifications
| Model Number | OH1500 |
| AC Voltage Requirement | 220V |
| Phase | single phase |
| Rated Power | 4.2 kw |
| Max. Gas Output | 1500L/h(adjustable) |
| Max. Working Pressure | 2 kg/cm2 |
| Max. Water Consumption | 0.64 L/h |
| Water Feed | auto |
| Dimensions - L*W*H | 585*630*860mm |
| Gross Weight | 110kg |
| Ventilation Space Requirement | 400mm in each direction |
Product Applications
Air Conditioner Copper Tube Brazing
For air conditioner copper tube connections and compressor pipeline joints, traditional oxy-acetylene brazing requires high-pressure cylinders and skilled operators to adjust gas ratios. The oxyhydrogen flame machine generates gas on-demand from water and electricity. The concentrated 3000℃ flame precisely heats the joint area, preventing thin-wall copper tube deformation and oxidation, producing smooth, full brazed joints without cold welds—effectively eliminating refrigerant leakage risks. Comprehensive operating costs are reduced by 35%-60% compared to oxy-acetylene, with no high-pressure cylinder storage or transport required, making high-altitude operations safer and more convenient.
Refrigerator Copper and Aluminum Welding
Traditional refrigerator evaporators use all-copper tubes with high cost and numerous weld points , thin-wall tubes are prone to leakage with conventional acetylene welding. The high-temperature reducing flame of the oxyhydrogen flame machine enables dissimilar metal welding between copper and aluminum tubes, forming a uniform transition layer at the Cu-Al interface that prevents brittle compound formation. This enables a "long aluminum tube + short copper tube" hybrid structure, reducing weld points, significantly cutting material costs and improving welding efficiency.
Refrigerator Compressor Copper Pipe Joint Welding
Hermetic sealing of refrigerator compressor suction/discharge tube joints demands long-term high-pressure integrity. Traditional welding with acetylene and oxygen cylinders poses safety risks in high-pressure container transport and storage. The oxyhydrogen flame machine delivers stable flame, producing uniform, consistent joints without post-weld acid pickling for oxide removal. The low-pressure gas supply (max 0.2MPa) is only 2% of cylinder pressure, no need gas cylinder, fundamentally eliminating explosion risks.
Brass Instruments Welding
Brass instruments (trumpets, trombones, saxophones, etc.) are precision assemblies of multiple copper tube components with densely packed weld points—most on thin-wall structures. Conventional welding tends to cause tube deformation or rough seams that compromise tone quality. The fine, concentrated flame of the oxyhydrogen flame machine precisely applies heat to tube lap joints, producing smooth, non-beaded welds with minimal heat-affected zone that preserves tube wall metallurgy and vibration characteristics—safeguarding tuning and timbre.