Product Introduction
The oxyhydrogen gas welder offers an ideal joining solution for silver, gold restoration, and multi-material assembly involving dissimilar metals such as gold-silver and gold-copper. The highly concentrated flame creates an extremely low-oxidation environment, enabling clean fusion without auxiliary shielding gases while effectively minimizing brittle intermetallic phase formation at dissimilar metal interfaces, delivering reliable joint strength that meets the durability demands of wearable jewelry.
Operating on water electrolysis, reducing comprehensive costs by over 40% compared to conventional small-scale spot welders and gas torch systems, while eliminating hazardous material storage such as acetylene and hydrogen cylinders.
Product Features
Product Specifications
| Model Number | OH10000 |
| AC Voltage Requirement | 380V |
| Phase | three phase |
| Rated Power | 35kw/h |
| Max. Gas Output | 10000L/h(adjustable) |
| Max. Working Pressure | 2 kg/cm2 |
| Max. Water Consumption | 5.6 L/h |
| Water Feed | auto |
| Dimensions - LWH | 1505*915*1985mm |
| Weight(kg) | 980 |
| Ventilation Space Requirement | 400mm in each direction |
Product Applications
Gold Welding and Repairing
Gold has excellent ductility but extremely rapid thermal conductivity—localized heating causes heat to quickly spread, easily softening and deforming nearby fine filigree or thin-wall structures. The highly concentrated flame of the oxyhydrogen gas welder precisely controls the heating zone with minimal thermal impact on surrounding areas. Welds are smooth with no oxide layer, requiring no acid bath cleaning before polishing—significantly reducing repair turnaround time.
Silver and Platinum Welding
The difficulty in silver jewelry welding lies in its relatively low melting point—slightly prolonged flame exposure causes collapse or burn-through—and silver readily reacts with atmospheric sulfur to form black silver sulfide. The oxyhydrogen gas welder delivers continuously adjustable heat output, allowing operators to flexibly control heating rate to prevent overheating. The flame contains no carbon or sulfur, fundamentally eliminating weld blackening. Joints emerge bright white with strength meeting daily wear tensile requirements.
K Gold Jewelry Welding
When remodeling or resizing K-gold jewelry, existing solder points must be dismantled and re-welded without altering the surrounding gold color. The oxyhydrogen gas welder delivers stable flame temperature with precise, controllable heat input that maximizes retention of alloying metals in K-gold—preventing volatilization. Weld points transition naturally with surrounding material, making joints virtually invisible to the naked eye. Ideally suited for routine remodeling such as ring resizing and pendant clasp replacement.