As a green welding device powered by water and electricity, the oxyhydrogen welding machine produces a high-temperature flame of 3000°C through water electrolysis. This article systematically outlines the operation procedures and safety essentials to help operators develop correct usage habits.
Oxy-hydrogen Generator Operation steps
Attentions:
1. Replenish water promptly if the equipment indicates a lack of water.
2. Ensure the welding nozzle's air pressure is sufficient during ignition to prevent backfire. Adjust the small valve if the ignition air pressure is too high.
3.When igniting, start from the back and bottom of the welding nozzle to avoid burns. Use an igniter for ignition.
2. In emergencies, turn off the fire, then power, and exhaust the air.
3. Close the welding gun valve quickly when turning off the fire to avoid flashback.
4. Use only pure or distilled water for equipment, tap water is prohibited.
5. Check equipment air tightness weekly to prevent safety hazards.
6. Clean equipment monthly to avoid failure.
7. Follow electrolytic cell maintenance instructions for generator maintenance.
Conclusion:
Safe operation of oxyhydrogen generator hinges on three pillars: standardized procedures, regular inspections, and timely maintenance. Operators should be familiar with the procedures outlined in this guide, strictly follow operating protocols, and establish equipment inspection systems to fully realize the safe, environmentally friendly, and efficient advantages of oxyhydrogen welding technology. For any operational questions or equipment anomalies, contact the manufacturer's technical support promptly.