Product Introduction
Oxyhydrogen welding machine is designed for transformer copper busbar, winding lead, and terminal welding, the 3000°C concentrated flame ensures minimal heat-affected zones, preventing copper deformation and insulation damage. Dense joints with conductivity near base material reduce contact resistance and overheating risks.
Powered by water electrolysis with on-demand gas and multi-level flashback prevention, no need gas cylinder, it eliminates high-pressure storage and explosion hazards; combustion yields only water vapor. With 20+ patents and CE/ISO certifications. Widely adopted by TBEA and Jiangsu Huachen, serving dry/oil-type busbar joining and high-voltage lead welding. Saving 35%–60% energy vs. acetylene, single unit supports multi-torch continuous operation for high-volume, high-reliability transformer production.
Product Features
Product Specifications
| Model Number | OH5500 |
| AC Voltage Requirement | 380V |
| Phase | three phase |
| Rated Power | 17.5 kw |
| Max. Gas Output | 5500L/h(adjustable) |
| Max. Working Pressure | 2 kg/cm2 |
| Max. Water Consumption | 5500L/h |
| Water Feed | auto |
| Dimensions - LWH | 1300*850*1670mm |
| Weight(kg) | 520 |
| Ventilation Space Requirement | 400mm in each direction |
Product Applications
Transformer copper busbars Joining
Transformer copper busbars's quality of butt and splice welds directly determinative of internal resistance and temperature rise characteristics. The oxyhydrogen welding equipment employs water electrolysis technology to produce a mixed gas whose combustion byproduct is water vapor, fundamentally eliminating contamination from carbides, sulfides, and other impurities in the weld zone. The 3000℃ high concentration flame effectively controls the heat-affected zone. A single large-scale oxy hydrogen generator can simultaneously power multiple torches.
Transformer Winding Leads and Enameled Wires Welding
Traditional processes require stripping the enamel insulation from magnet wires before welding—a cumbersome procedure that risks core damage. The concentrated flame of the oxyhydrogen generator instantly vaporizes the enamel insulation while simultaneously completing fusion welding, eliminating the need for pre-stripping. The precisely controllable flame produces a minimal heat-affected zone, preventing thermal damage to the insulation of adjacent coils. The resulting weld forms a dense, full metallurgical bond without cold welds or porosity, ensuring reliable conductivity.
Transformer Copper End Ring Brazing
Certain structural components inside transformers involve copper end ring connections requiring both mechanical strength and electrical conductivity. The concentrated flame of the oxyhydrogen generator produces a minimal heat-affected zone, precisely heating the end ring lap area with minimal post-weld deformation and dense weld structure. The reducing atmosphere continuously removes oxide films during fusion, meeting the reliability requirements for long-term current-carrying transformer operation.
Copper Bar to Copper Bar Welding
Copper busbar joining is the most fundamental process in transformer conductive circuits, encompassing flat butt joints, right-angle lap joints, and T-configurations. Conventional oxyacetylene welding, with its divergent flame and uneven heat distribution, tends to produce porosity and slag inclusion in the weld zone. Moreover, residual carbides from acetylene combustion adhering to busbar surfaces can accelerate insulating oil degradation in oil-immersed transformers, compromising long-term service life. The oxyhydrogen generator operates on on-site electrolyzed water gas, delivering a concentrated, uniformly distributed 3000℃ flame that fuses copper busbar lap faces in a single operation. The reducing atmosphere of the oxyhydrogen flame continuously strips oxide films during fusion, producing dense, impurity-free weld structures.
Flat Copper Wire and Flat Aluminum Wire Brazing
Copper-aluminum welding is challenging due to large melting point differences and the persistent alumina film on aluminum surfaces—conventional methods tend to produce brittle compounds that cause joint failure. The high-temperature reducing flame of the oxyhydrogen generator rapidly strips the oxide layer, enabling metallurgical bonding between copper and aluminum under controlled conditions with minimal brittle compound thickness, stable contact resistance, and strong galvanic corrosion resistance. Requires no flux, generates no hazardous fumes, and produces clean welds—ideally suited for oil-immersed transformers.