Product Introduction
The oxyhydrogen generator provides a clean, green heat source for wax pattern finishing in investment casting. The concentrated, non-diffusing flame is precisely adjustable via gas flow regulation, suitable for wax seam finishing, pinhole filling, and assembly of contoured wax components. The smooth, burr-free joints require no secondary scraping, effectively reducing slurry accumulation and shell cracking risks in subsequent shell-making processes.
Operating on water and electricity alone with on-demand gas generation, it delivers lower total operating costs compared to traditional electric irons, with no consumable replacement hassles and no cylinder management, fundamentally eliminating flashback and explosion risks.Particularly suited for high-quality investment casting wax patterns in aerospace blades and precision machinery components.
Product Features
Product Specifications
|
Model Number
|
OH600
|
|
AC Voltage Requirement(v)
|
220/110
|
|
Phase
|
single
|
|
Power Consumption(kw/h)
|
2
|
|
Max. Gas Output(L/h)
|
600
|
|
Max. Working Pressure(Mpa)
|
0.14
|
|
Max. Water Consumption(L/h)
|
0.33
|
|
Water Feed
|
manual
|
|
Flame Modifier Feed
|
manual
|
|
Dimensions-LWH (mm)
|
945 * 246 * 470
|
|
Gross Weight(kg)
|
45
|
|
Ventilation Space Requirement(mm)
|
200 in each direction
|
Product Applications
Wax Pattern Surface Repairing
The oxyhydrogen welding machine, used with matching wax material, applies micro-zone heating to melt and fuse new wax into the defective area, achieving dense bonding with the original pattern. Precisely adjustable flame acts only on the defect without blistering or distorting the surrounding intact wax surface—after polishing, the repaired area restores a smooth finish.
Jewelry Wax Patterns Welding
Jewelry wax patterns are small and finely detailed—when connecting rings, pendants, earrings and other wax components to the wax tree gating system, precise welding is required without damaging surrounding details. The oxyhydrogen generator's flame can be reduced to 0.5mm pinpoint size, achieving 1-2 second rapid fusion at connection points with no scorching. Post-weld wax components remain intact and residue-free, significantly improving jewelry wax tree assembly efficiency and success rates.
Artworks and Sculpture Wax Patterns Repairing
Art casting and sculpture wax patterns are large in volume with complex shapes—over prolonged fabrication periods, wax material is prone to cracking or localized defects due to ambient temperature fluctuations. The oxyhydrogen gas equipment offers stepless flame adjustment from micro-point repair to broad-surface heating, paired with various nozzle sizes to flexibly meet diverse irregular wax surface repair needs—ensuring the original lines and curves of art wax patterns remain intact.